江蘇美國分析儀供應商

Procedure – Powder/Chip Samples

Determine the instrument blank.

Press the Analyze button on the instrument screen, the lower electrode will close and the analysis sequence will start and end automatically.

Repeat steps 2b through 2g a minimum of three times.

Set the blank following the procedure outlined in the operator's instruction manual.

Instrument calibration/drift correction.

Login a minimum of three Standard reps.

Weigh approximately *** grams of a calibration/drift standard into a *** Nickel Capsule; enter the mass and standard identification into appropriate rep fields. If applicable, place the nickel capsule in the appropriate autoloader position.

提供各種無機材料、鋼鐵、有色金屬、硬質合金、陶瓷材料中寬范圍的氧氮?dú)渫瑫r(shí)分析。江蘇美國分析儀供應商

氧氮?dú)浞治鰞x

氧氮?dú)浞治鰞x是一種用于材料科學領域的儀器，于2016年03月09日啟用。

技術指標

測量范圍： ON 低氧0.0－300ppm OH 低氧0.0－300ppm 高氧0.0－2% 高氧0.0－2% 低氮0.0―300ppm 低氫0.0－50ppm 高氮0.0－2% 高氫0.0－1000ppm 靈敏度： 氧0.01ppm；氮0.1ppm；氫0.01ppm。

主要功能

該儀器配置有16位微處理器和兩個**的分別檢測高氧和低氧的 紅外檢測池。氮和氫通過雙重范圍的熱導檢測池測量。分析過程中可自動實現從 低范圍到高范圍的切換。樣品在高功率脈沖爐的石墨坩堝中加熱可達3000℃以上 高溫，脈沖爐采用循環水冷卻。該儀器具有靈敏度高、性能好、測量范圍寬和分 析結果準確可靠等優點。ONH-2000氧氮?dú)浞治鰞x是為快速、準確測定銅、鋼、鑄 鐵、合金、鈦、鎳、鉬、鋯、陶瓷和其它無機材料中氧、氮、氫的含量而專門設計 制造的。 浙江美國LECO氧氮?dú)浞治鰞x優惠價格強力內循環水冷裝置。

氧氮?dú)浞治鰞x是快速、準確分析氧、氮、氫元素的、高性能儀器，整機采用模塊化、一體化設計，即主機由可靠的脈沖電極爐、高靈敏高精度的檢測系統、布局合理和氣密性好的氣路系統、可靠耐用的電源系統、穩定的電路系統、高校節能的水循環散熱系統等六個**的硬件模塊單元組成。

氧氮?dú)浞治鰞x的測量原理：

測量范圍非常***。分析樣品時，樣品被稱重后放到樣品端口中，然后用載氣進行沖洗，防止大氣（含氧氣和氮?dú)猓┻M(jìn)入到爐子系統中。

石墨坩堝在脈沖爐中脫氣，以盡量減少自帶的污染。經過穩定階段后樣品落入坩堝中并熔融。樣品中的氧與石墨坩堝中的碳反應生成一氧化碳。氮和氫以單質的形式釋放。載氣和樣品氣體通過粉塵過濾網后再進入到氧化銅催化爐中，將一氧化碳氧化成二氧化碳。

二氧化碳進入到紅外池中用于測定氧含量，被測后的氣體導入化學試劑管，這時二氧化碳和水被化學試劑除去，氮元素通過熱導檢測池含量被測定。測量氫時，載氣換為氮?dú)?，樣品氣體通過舒茨試劑而不是氧化銅催化劑。測氧和氮時也可采用更廉價的氬氣作為載氣。

LECO—Your source for total analytical solutions

CS CS 844 and 744 Series: Carbon/Sulfur by Combustion

Carbon and sulfur determination by combustion infrared detection

Quick, accurate, and affordable determination for both production control and research

Calibration, analysis, evaluation, and diagnostic functions accessible via user-friendly brand software

GDS GDS 500A and 850A Atomic Emission Spectrometers

Spectral range from 120 to 800 nm

Continuous profile of concentration/thickness

Large, dynamic range with concentrations from ppm to 100% by weight

Short analysis time (minutes)

氧氮?dú)浞治鰞x選哪家？給你推薦上海禹重科技！

Oxygen, Nitrogen, and Hydrogen in Refractory Metals

Summary

Titanium is a metal that can be combined with elements such as aluminum, vanadium, molybdenum, and tin to produce high-strength, lowdensity, and corrosion-resistant alloys. Titanium alloys are used by the military, medical devices, sporting goods, and aerospace industries because of these properties, and due to the strict demands of these industries, effort needs to be taken to assure that the material meets the highest of quality standards.

Cornerstone氫氧氮分析軟件同時支持***的書記文檔格式和可變的報告格式。廣東LECO分析儀供應商

國際**的非色散紅外及熱導檢測器 ，無移動部件，不需要手動調整。江蘇美國分析儀供應商

Sample Preparation

Sampling and sample preparation of refractory metals such as titanium and zirconium is somewhat different from that of steel. Unlike steel samples, hydrogen is not as mobile in this group of materials; therefore, storage in liquid nitrogen or dry ice is not required. However, it is important to keep the sample cool when cutting or sectioning. Sample preparation for oxygen and nitrogen determination has beendifferent from that of hydrogen determination.

江蘇美國分析儀供應商